Fender EVH 5150 Amplifier Simulation Nick Crow's 7170 Lead VST plugin is an excellent tube amp simulation. The 7170 emulates the lead channel of the Fender EVH 5150 guitar amp and features: drive (the amount of gain applied by the Pre Amp), 4 Tone Stack controls (low, mid, sweep, and high) and gain applied by the Power Amp. The free SimulAnalog Guitar Suite is a VST plugin collection of accurately modelled analog amplifiers and other classic processors for guitarists. In this article, we will explore the best guitar amp VST on the market today. Best Value All-in-One Guitar Amp VST Packs. These guitar amp simulator packs offer home studio guitarists a great deal. They include multiple different guitar amplifier heads, cabinets, effects pedals, microphone choices, and more.

1. Best Free Guitar Amp Simulator Vst/au Plugins
2. Best Free Vst Guitar Amp Simpson
3. Best Free Guitar Amp Simulator Vst

Editor’s Note: In this article, we’ll go into the best amp simulator VST plugins in the market as of 2020. If you’re looking for the summarised version, check out the table below, for a full breakdown, read on:

Whatever musical direction you’re taking, there’s a high chance you’ll be using at least some distortion.

This effect was popularized back in the old days by blues and rock ‘n’ roll guitar players, who sometimes even damaged their equipment to get this tone.

Luckily for us today, achieving distortion is not that hard, and there are plenty of safe and affordable ways of doing it.

Of course, the first association is often the guitar-oriented music, but great-sounding distortion can be found even in electronic music.

Even EDM musicians resort to using guitar effects, actual distortion pedals or guitar amp sims.

But if we’re talking about music production, mixing, and working in any DAW, it’s definitely easier and way more practical to rely on plugins.

Sometimes, you can get some pretty great guitar tones, for whatever purposes, by using some great amplifier simulation plugins.

Whether you’re a guitar player, bassist, DJ, instrumentalist, or even a vocalist – here are the best amp sims for you to check out.

Although mostly focused on guitar-oriented music, you’re always free to experiment and use them for other purposes as well. Here it goes.

Positive Grid – Bias FX 2– Our Overall Choice

A new amp simulator by Positive Grid, the Bias FX 2 amp sim brings a whole universe of options in creating one’s tone.

It’s not a product focused on limited types of tones and musicians.

The newest in the Bias amp series brings an abundance of different amps, cabinet simulations, pedals, and microphones, all extremely realistically representing the respective models that they’re imitating.

There’s a wide variety of high gain amps for our metalhead readers, as well as a bunch of experimental effects to get your creative juices flowing.

Talking about amps and cabinets, Positive Grid teamed up with Celestion to bring digital replicas of the legendary speakers found in many of the prestigious cabinets. You can check the full list of amps here.

Overall, the Bias FX 2 brings some pretty advanced stuff with a surprisingly simple operation, making our favorite amp sim in the market right now.

It comes as a great option for any level of playing and musicianship. Even beginners will find it easy to use, and the Bias amp can be a great way for them to get acquainted with the world of guitar amps and pedals.

It’s also one of the most affordable VST plugins in this list, and includes a free demo.

Check out the video review below:

Overloud – TH3– Simple but Effective.

Overloud’s TH3 amp simulator and plugin works in a similar way compared to the Bias, with a bunch of amp, cabinet, pedal, and mic models.

When it comes to guitars, there are 89 different amps, as well as 50 cabinets. Bass players, however, don’t have that many options, since there are only 4 bass amplifier models and 2 bass cabinet models.

Going over to the pedals and other effects, there are 77 different emulations to choose from. The choice of microphones is decent, with 18 different models and the possibility to choose up to 4 mics per one cabinet.

In total, there are 1000 different presets that will help you get great amp simulations right out of the box.

What’s more, Overloud collaborated with some of the famous amp brands, including Randall, to recreate their guitar tones.

Ignite Amps – Emissary– Our Free Choice

Ignite Amps have a few interesting solutions for amp simulators, all of them giving some really solid tones, both for Clean and Distorted situations.

Best Free Guitar Amp Simulator Vst/au Plugins

The one we found worth mentioning on this list is the Emissary plugin, a super fun high gain amp.

Although focusing on just one amp model, it still provides a solid amount of possibilities and great tube-oriented modern metal tones.

The physical amp that it replicates is also called Emissary and was made by Ignite for Ryan Huthnance.

It may not be as versatile as some of the other plugins here, but its strength lies in a very realistic representation of this tube amp.

It has two channels, Clean and Drive, along with standard controls and some additional switches for additional EQ shaping.

And the best part?

It’s free!

IK Multimedia – AmpliTube 4– Our Mic Amp Simulator Choice

Made by IK Multimedia, AmpliTube has been around for quite some time now.

The fourth installment in the series takes things to a whole new level, with some of the modern guitar heroes expressing their admiration for this plugin.

An abundance of great amps of all the different eras of modern music, stompbox models, cabinet models, mic models, as well as possibilities to create intricate and non-linear signal chains.

Things get pretty interesting with the virtual microphone and cabinet placement, providing some very realistic-sounding amplifier tones. You can place microphones in virtual 3D settings, which is a pretty exciting feature.

Universal Audio – Fender 55 Tweed Deluxe

Now, this plugin is a little different. First off, it focuses on just one amp which, expectedly, limits its versatility and leaves you with not many options. However, this was actually Universal Audio’s intention, to have just one amp and recreate it as realistically as possible.

The piece in question is Fender’s good old vintage gem, the ’55 Tweed Deluxe. This plugin was done in collaboration with Fender, who helped them out in digitally recreating this amp’s legendary circuitry.

It may have somewhat of a narrow use, mostly those who are looking for those sparkly vintage-oriented blues tone.

But the recreation is just astoundingly realistic, coming very close to the original. Take the good old Tweed Deluxe and mic it up with different microphone simulations.

Studio Devil – Amp Modeler Pro

Although intended for guitars, the Amp ModelerPro by Studio Devil will also give great amp models, distortions, and othereffects for electronic music makers as well.

There are about 15 different preamps that come with it, 32 cabinets, plenty of different pedals and rack-mounted effects, as well as different controls and elaborate EQs.

It’s a somewhat cheaper option compared to the other entries on this list, although it definitely manages to convincingly reproduce classic and modern amplifier tones.

Native Instruments – Guitar Rig 6– Our Overall #2 Choice

October 2020 update: Native Instruments just announced the new version of Guitar Rig- V6.

Guitar Rig 6 comes with a new interface, pictured below, more effects, and new AI tech.

It’s been almost 5 years since the latest update to guitar rig, so the expectations were high within the music production community, and in our opinion, the new version lives up to the hype.

The first thing you’ll notice with Guitar Rig 6 is it’s brand new interface. It’s looking way cleaner and simpler to use.

In addition, 16 new effects were added, including the following softube amps: RC24, RC48, CV2A, VC2A, VC76, and CC160.

All in all, Native Instruments Guitar Rig 6 is one of the most diverse guitar amp sims at the moment.

At the same time, it’s very accessible and is one of the best options for beginners who want to learn more about amplifiers, cabinets, pedals, and other effects and units.

Comparable to AmpliTube and Bias products, there’s a fair amount of amp and cabinet simulations with more than 50 effects and an option to use up to 8 different microphone models on one cabinet at the same time.

This is one of the Native Instrument’s most popular products.

Line 6- Helix Native- Our High End Choice

Last but not least, we have the Line 6’s Helix Native.

This is a great model to get that vintage rock sound, perhaps even the best amp simulator on this list. It’s priced on the high-end though and not exactly beginner friendly, so unless you have some experience under your belt, we’d recommend trying out an easier to use guitar amplifier simulator such as the Bias FX 2.

However, if you do know what you’re doing, the Line 6 is a great piece of software.

It includes over 100 effects and 60 amps, including some of the legendary amps used by Hendrix et al (Mesa Boogie, etc).

If you’d like to have a go at the Helix Native, Line 6 does offer a 15 day free version.

Final Thoughts and Overall Winner

And there you have it, the very best amp simulator available for purchase right now.

Combined, they represent thousands of amps, cabinets, and stompboxes.

Best Free Vst Guitar Amp Simpson

So take your time, read about the amps offered by each, and make your decision. If you’re looking for an expert opinion- We’d go with the Positive Grid Bias FX 2

Rock on!

Last Updated on December 9, 2020 by

Guitar amp simulation VSTs are, more often than not, loaded on a VST Host, like a DAW or any other program with those capabilities.

There are a few however, that can be used as standalone programs, which can be useful if you want to jam a track without having to fire up your DAW.

In this article, I will list the 7 best free standalone amp simulators, as well as show you an easy way of running any amp sim that doesn’t have the standalone feature in a matter of seconds.

Best Free Standalone Amp Sims VSTs

Let’s get straight into the post!

BIAS Amp II Demo

If you’re the kind of person who likes getting into the nitty gritty of amp design, then this is definitely the plugin for you.

With BIAS Amp II you can control every single aspect of the amp; It does offer the usual parameters on the front like Gain, Volume, EQ, etc., but where this plugin really shines is in allowing you to switch the actual componets of the amp, likes tubes, controling the preamp, poweramp, cabinet, mic positioning, etc., to be able to tailor the sound to your needs.

The demo version will suddenly cut the audio for 5 seconds, and then you can keep playing. However, this only happens every 5 minutes or so, which means that you can use it to record if you time it correctly.

As far as the clean tones go, I’ve never tried any other amp simulation software that makes them sound as real as the Amp II, and when I’m not recording my actual live amp for clean tones, this is the plugin I use.

The overdriven tones are absolutely amazing as well, but getting them to sound how I want is a bit harder to do, at least for me.

Who is BIAS Amp II for?

I would mostly recommend it to people who have experience with real amplifiers, since otherwise you’ll get lost with ease because of all the components that can be swapped and tweaked.

If you have the patience and knowledge to really dig into the settings to adjust the sound in depth, then this is definitely the plugin for you.

If you are new, on the other hand, then check out the next plugin on this list since it will suit your needs a lot better.

Find out more about BIAS Amp II here.

BIAS FX II Demo

This is a Standalone Guitar Amp and Pedal suite that gives you access to a couple different amps, cabinets and pedals.

One feature that makes BIAS FX so good is that you can split the signal and run it through two different amp- and pedal configurations, giving you more sound design options.

Just as it happens with BIAS Amp II, the demo version of this software will cut the audio every couple minutes and then resume.

While it doesn’t offer the same in-depth amp configuration that Amp II does, you can load the amplifiers you created in Amp II on to BIAS FX and use them there, but here you have the option of adding effects, mixing it with another amp by splitting the signal, etc.

Who is BIAS FX II for?

Since it’s quite easy to use, it’s the ideal amp simulation software for beginners who don’t want to have to spend hours tweaking just the sound of the amp.

BIAS FX comes with some pre-configured amps and also some great-sounding presets, which you can use as a jumping off point to tweak the sound from.

Find out more about BIAS FX II here.

Amplitube 4 Custom Shop

Amplitube is by far the best-known amp simulation software, and it’s also the first one to come out, which means that it has had over a decade of improvements.

When you download the free version you will have access to the full version of the software for 15 days, and once the trial perioid is up you will still be able to use it but with a reduced feature count.

Amplitube is one of the more realistic-sounding amp simulators out there, plus the free version comes with a couple more amps and effects than other amp sims out there, like Guitar Rig Player.

This one can do clean tones really well, but where I think it shines is in the overdriven- and high-gain tones.

Who is Amplitube 4 Custom Shop for?

Since it’s easy to use and it also comes with quite a lot of amps, pedals, cabinets, etc. for you to play with, I think that it’s a great all-rounder that everyone should try.

But I would mostly recommend it to people who are thinking of purchasing an Amp Sim but who want to be able to try out the full software before actually spending the money.

Note: Registration needed to download and use.

Find out more about Amplitube 4 Custom Shop here.

Guitar Rig Player

Guitar Rig player is the free version of their famous Guitar Rig Pro, which is an amp simulation software used by many, both for jamming and recording as well.

The free version could use a couple extra features, since it only comes with one amp and a matched cabinet. Plus it only includes one tube screamer, which means that getting high gain tones out of it will be impossible.

However, the clean tones really do sound great, and since you will have access to different effects pedals, such as Reverb, Delay, Filter, etc., you can actually use it to create pretty convincing guitar tones.

Who is Guitar Rig Player for?

Since it’s so easy to use, I think that it’s great for beginners who want to learn how amp sims work, and in this case, having fewer features than Amplitube or BIAS FX is a pro, since it will be easier to learn.

Additionally, if you are primarily interested in recording clean guitar, then by all means, get Guitar Rig Player. Just remember that it’s not really capable of producing high gain tones.

Note: Registration needed to download and use.

Find out more about Guitar Rig Player here.

Amplion

Despite its installation process being a bit annoying -since you need to register and wait for an email with a serial number, then download and install using that serial number-, I do think that Amplion has a lot to offer.

The free version comes with a 5-channel guitar amp and two different cabinets where you can adjust the mic placement to control the tone.

Now, the free version doesn’t come with any effects, which is a shame, but it does come with a built-in media player that lets you load iTunes or MP3 playlists to play along.

As far as the sound quality goes, it’s nowhere near as good as any of the previous software I described, but hey, it’s free!

Who is Amplion for?

Since it barely uses any CPU resources, it may be suitable for anyone with a low-specced PC, and since the clean tones don’t sound half bad, I can also see people enjoying those.

Find out more about Amplion here.

Amped Roots Free

The whole point behind this free amp simulation plugin is to be as simple as possible and to sound perfect right out of the box, and I think they nailed it.

I can absolutely recommend it to anyone who is interested in getting realistic heavy tones out of their guitar, especially if you are just starting out, since every single preset sounds fantastic and since it doesn’t feature too many different controls.

This is by far the best free amp simulator for hevy tones that is currently available, so make sure to check it out!

Additionally, it comes with a Noise Gate, a Drive pedal, a Delay and a Reverd, and all of them are accessible on the “Pedalboard” panel.

Who is Amped Roots Free for?

Anyone who is into metal, djent, or any other high-gaing genre, especially if you’re just starting out since it’s so easy to make it sound great, plus it’s free and it works as a Plugin or Standalone program.

Find out more about Amped Roots Free here.

Guitar Amp 2 Free Edition by Plektron

This is an older guitar amp simulator, but it’s one of the few that is free and that also works as a standalone unit.

It comes with one british amp, a couple cabinets, a bass amp, a tuner and some effects pedals, but that’s about it.

The sound quality isn’t very realistic, but it can certainly be used to come up with different tones in a creative way.

Still, I’d encourage you to try it out since it’s completely free and lightweight.

Who is Guitar Amp 2 for?

Anyone who wants to experiment and get different tones from what regular amp sims can achieve, since it doesn’t sound that realistic.

Find out more about Guitar Amp 2 here.

These are all the Amp Simulators I could find that work as a standalone program, but did you know that you can use a VST Host to run any amp sim, even if they don’t work as a standalone program?

Using a VST Host to load any Amp Simulation Plugin

A DAW, or Digital Audio Workstation, works as a VST Host, in the sense that it lets you load those VSTs and run them.

However, there are other similar programs that are designed to do that, and this means that you could run any amp sim on a very light piece of software without having to download a complete DAW.

So, yes! You can run any amp sim on a lightweight VST Host and not just a DAW.

Here’s how to do it;

Head over to hermanseib.com and download the VSTHost program, then copy all the files into a folder. Media monkey vst plugins.

Now you can run VSTHost by double-clicking on it.

You will need to configure the Audio Settings in order for it to work; Click on “Devices” and then on “Wave”.

Best Free Guitar Amp Simulator Vst

Here you can choose your Input and Output devices. In my case I only needed to set the Output Port to “ASIO: Audient USB Driver” and it already worked perfectly.

After this you can load a new plugin by clicking on “File” and then on “New Plugin”.

Once you open the amp simulator you want, to configure it you will need to click the button that looks like a little knob, and this will open the plugin’s interface to let you adjust its settings.

And that’s it!

Now you can get any Amp Simulator you want and run it on your PC without the need of using a DAW.

And now, here’s one honorable mention!

TH3 Free: Comes with Cakewalk

Cakewalk is one of my favorite DAWs, especially since it’s completely free and doesn’t come with any limitations. The only issue is that it’s for Windows only… Sorry Mac users.

With it you get TH3 Free, which is an Amp Simulation software that is very similar to TH-U by Overloud but instead of costing like $200, you get it free here.

So, not only do you get one amazing DAW for free, but you also get an amp simulation software for free as well.

Premium Alternatives

While this list was mainly aimed at freeware amp sims, there are some benefits to purchasing one; be it to get more features or to remove the annoying silences that occur on BIAS FX and BIAS Amp.

BIAS Amp II and BIAS FX II

Record live with vst plugins in cubase. You can get the basic versions of both amp simulators for $50 each, which might seem like a lot, but some other programs sell for $300+, so this is actually quite affordable.

Like I mentioned in the beginning, BIAS Amp II lets you customize your virtual amp in ways that no other amp simulator has ever been able to, and it sounds extremely realistic.

BIAS FX is perfect for any beginner because of how easy it is to use, plus it also sounds amazing.

Just remember that you will be able to use the amps you created in BIAS Amp II inside of BIAS FX, which means that it may make a lot of sense to get both.

Find out more about BIAS Amp II and BIAS FX II here.

Archetype Plini by Neural DSP

Archetype features three different amps: Clean, Crunchy, and Lead, and they all sound fantastic!

A compressor and booster/overdrive pedal are included to provide additional flexibility and adaptability to different styles and instruments, as well as a 9-band EQ, and some Reverb and Delay effects.

Lastly, it includes a cab sim.

And that’s really it…

It’s a super simple amp simulation plugin that comes with a very clean and clear interface, making everything super intuitive… and the sound is just absurdly good!

Not only that but you can try it for free, since they offer a free 14-day trial.

Note: Neural DSP created a lot of other amp sims that you should also check out.

Find out more about Archetype Plini here.

PRS Supermodels by Waves

The PRS Supermodels were created by Waves in collaboration with Paul Reed Smith.

Even though you only get three amps, they are actually quite versatile, allowing you to achieve loads of different tones which should fit in perfectly in every mix.

The three amps you get are; The Dallas, Archon, and Blue Sierra/V9.

The Dallas and V9 are for more laid-back styles of playing, while the Archon is designed completely for metal and other heavy styles.

I actually like the V9 a lot for rock/metal guitar solos as well… the tone is just killer!

This plugin bundle is super affordable, setting you back only about $39 (at the time of writing this article).

Find out more about the PRS Supermodels here.

Conclusion

While having standalone amp sims maes a lot of sense, since you don’t want to be opening a huge DAW just to play some guitar, you can actually get any guitar amp sim and use the VST Host program I linked earlier.

I aso listed a couple premium amp sims here because sadly, most free ones don’t come even close to the paid ones.

Still, I’d recommend you try every single amp sim on this list, and then move on from there.

I hope this information was useful.

Have a wonderful day!